Wheel brush Stainless steel, crimped, with shank
Spindle-mounted wheel brush with stainless steel
WHLBRSH-SHNK-PWRDRL-SST-D60X13X6MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- For use on die grinders and drills
- High speeds improve brush performance and service life
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases the required drive power and reduces the service life of the brush.
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, contamination etc.
- Cleaning welding seams
- Light deburring work
Diameter x usable width x shaft diameter (DxAxS) | 60 x 13 x 6 mm |
Usable length of wire (H) | 14 mm |
Wire diameter | 0.30 mm |
Material of wire | Stainless steel |
Surface | 0 - not applicable |
Design | Corrugated, Single row |
Aggressiveness | Middle |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 15000 rpm |
Last viewed
Pipe cutter
Polishing pads
Air Quick Fresh Active
Engine flush and cleaner For use in all petrol and diesel engines
Krex round brush
Rapid windscreen cleaner in display carton
Cover caps For aluminium airline lashing rails
Brake cylinder rubber grease
Additional print costs for NPH Klapp-Fixx
Rubber blade refills, flat, cars For cars with flat-blade technology