Welcome to Würth Vietnam For trade customers only

High-strength screw retainer

Threadlocker high strength
THRLOK-DOS-HSTRTH-50G

Art.-no. 0893270050
EAN 4099618126291
Prices for customers after login
High-strength screw retainer

Art.-no. 0893270050

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Tough removable screw retainer and sealing compound – single-handed dispensing system

High-strength bonding


  • Can only be removed once heated up to > 250°C


Suitable for screw connections exposed to high stresses


  • A 100 % seal is achieved - no additional securing parts are necessary

  • Protects against corrosion due to friction and against rust


Excellent media and thermal stability


Universal products with wide range of applications



Prevents detachment, e.g. through vibration and shock loads


No unwanted locking problems such as with mechanical screw retainers, for example



High resistance


Resistant to a large number of bases, gases, solvents, oils and fuels (see resistance list)



Silicone-free, solvent-free and oil-free



DOS system:


  • Practical one-handed operation thanks to the clever turn lock

One hand always remains free.


  • Continuously adjustable dispensing system

Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.


  • No residue material in dispensing neck

Costs optimised thanks to emptying with virtually no remaining product

Notice

The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces.

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For securing, fastening and sealing threaded connections such as bolts, stud bolts, nuts, threaded plugs, thread inserts, ball bearings and roller bearings, which do not normally have to be detached. The high-strength threadlocker is for use in the automotive and commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, and electrical and electronics construction.

Instructions

This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.


For more information, please refer to the technical data sheet.

Chemical basis

Dimethacrylic acid ester

Colour

Green fluorescent

Density/conditions

1.11 g/cm³ / in accordance with DIN EN ISO 2811-1

Min./max. viscosity /conditions

500-900 mPas / at 25°C, Brookfield RVT, spindle 2/20 rpm

Suitable for max. thread

M25

Max. gap-filling ability

0.15 mm

Min./max. initial strength

5-15 min

Min./max. functional strength

1-3 h

Min./max. final strength

3 h-6 h

Min./max. compressive shearing strength /conditions

15-30 N/mm² / in accordance with ISO 10123

Min./max. breakaway torque

30-60 Nm

Breakaway torque conditions

DIN EN 15865

Min./max prevail torque

10-30 Nm

Conditions for prevail torque

DIN EN 15865

Min./max. processing temperature

5 to 35 °C

Min./max. temperature resistance

-55 to 150 °C

Min. flashing point

100 °C

Shelf life from production/conditions

18 Month / at room temperature

Weight of content

50 g

Silicone-free

Yes

Solvent-free

Yes

Fully hardening/curing conditions

Exclusion of oxygen and contact with metal (copper or iron ions)

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information