Welcome to Würth Vietnam For trade customers only
Diesel particulate filter cleaner - CLNR-PARTCLFILT-400ML
´
Diesel particulate filter cleaner - CLNR-PARTCLFILT-400ML - 1

Diesel particulate filter cleaner

CLNR-PARTCLFILT-400ML

Art.-no. 5861014500

EAN 4065746333948

Individual price display after login
Diesel particulate filter cleaner

Art.-no. 5861014500

Individual price display after login
Quantity
PU
x 12 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Cleaner for removing carbon and ash deposits from diesel particulate filters

Loosens and removes carbon deposits in the particulate filter



DPF can be cleaned without needing to remove it


Cuts costs, as a new particulate filter does not need to be fitted (depends on the condition of the particulate filter)



Not flammable



Neutral, ash- and metal-free recipe



Residue-free evaporation

Notice

This information is intended to advise you to the best of our knowledge, based on our tests and experience. Test the product before use! For further information, please refer to the technical data sheet.

The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

The diesel particulate filter cleaner is used to rectify performance losses or faults that are exacerbated by dirty diesel particulate filters. The full absorption capacity is restored by cleaning the filter.

Instructions

Remove the temperature or pressure sensor.


Insert the probe into the hole created and spray in the direction of the particulate filter to empty
Regeneration then needs to be initiated manually via the tester or by taking a test drive
Interrogate the fault memory following regeneration and delete any errors if necessary. One can is sufficient for one particulate filter

Contents

400 ml

Weight of content

426 g

Colour

Rosy

Smell/fragrance

Aminic

Chemical basis

Water

Shelf life from production

15 Month

Density

1.01 g/cm³

Density conditions

at 20°C

pH value

11.47

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information