Welcome to Würth Vietnam For trade customers only

Adhesive lubricant HHS® 1000

Adhesive lubricant HHS 1000
ADHLUB-HHS1000-500ML
HHS

Art.-no. 08931064
EAN 4099618219788

Prices for customers after login
Adhesive lubricant HHS® 1000

Art.-no. 08931064

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Fling-proof low-viscosity grease with dual effect: Penetrating properties of an oil, adhesive and pressure-resistant like grease

When sprayed: Oil


  • Good creep properties

  • High penetration into gaps

  • Protects against corrosion

  • Penetrates areas where conventional grease cannot reach


After evaporation: Grease


  • Extremely adhesive

  • No flinging

  • Good long-term effect


Excellent pressure resistance


  • Extraordinarily tear-proof lubricating film with high pressure loads

  • Excellent noise and vibration dampening


Good material compatibility


  • Compatible with O-rings and X-rings

  • Compatible with plastic

  • Neutral effect on painted surfaces


Resistant to spray water and salt water, weak acids and bases



Silicone-, resin-, acid- and AOX-free

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Fling-proof low-viscosity grease with dual effect: Penetrating properties of an oil, adhesive and pressure-resistant like grease.


Suitable for lubricating under difficult re-lubrication conditions during maintenance and service work, e.g. internal bearings, wire ropes, joints, shafts, roller bearings.

Instructions

Shake the can well before use. Thoroughly clean the location to be lubricated. Then spray onto the cleaned surface.

Chemical basis

Mineral oil

Oil basis

Synthetic

Colour

Yellowish

Smell/fragrance

Characteristic

Density

0.773 g/cm³

Density conditions

at 20°C

Min. temperature conditions

-25 °C

Max. temperature conditions

170 °C

Kinematic oil basis viscosity

2000 cSt

Conditions for viscosity of oil basis

at 40°C, in accordance with DIN 51562

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

Resistance against

Weak lyes, Weak acids, Splash

Material compatibility

O- and X-Ring, Plastic, Coated Surfaces

Contents

500 ml

Shelf life from production

36 Month

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information